Article on ManuSoft

Microsoft Visual C/C++ Environment

Mon, 01 Jan 0001 00:00:00 +0000

Setting up MSVC for ObjectARX development.

Undocumented Commands

Mon, 01 Jan 0001 00:00:00 +0000

Undocumented AutoCAD commands.

Undocumented System Variables

Mon, 01 Jan 0001 00:00:00 +0000

Undocumented AutoCAD system variables.

Using VC Build Hook to Target Multiple AutoCAD Versions

Mon, 01 Jan 0001 00:00:00 +0000

Target multiple AutoCAD versions from one Visual Studio tree.

Demand Loading a LISP File

Mon, 01 Jan 0001 00:00:00 +0000

Demand-load a LISP or VLX file from an ObjectARX stub of the same name.

Undocumented AutoLISP Functions

Mon, 01 Jan 0001 00:00:00 +0000

Undocumented AutoLISP functions.

Undocumented ObjectARX Functions

Mon, 01 Jan 0001 00:00:00 +0000

Undocumented ObjectARX exports from AutoCAD R14.

Using VC 7 to Build For AutoCAD 2000/2002

Mon, 01 Jan 0001 00:00:00 +0000

Building ObjectARX for AutoCAD 2000/2002 with Visual C++ 7.

Enabling IntelliSense and ObjectARX Class Browsing

Mon, 01 Jan 0001 00:00:00 +0000

Enable IntelliSense and browse ObjectARX classes in Visual Studio.

Using VC 7.1 to Build for AutoCAD 2000/2002/2004

Mon, 01 Jan 0001 00:00:00 +0000

Building ObjectARX for AutoCAD 2000–2004 with Visual C++ 7.1.

Digital Signatures

Mon, 10 Dec 2007 00:00:00 +0000

Introduction

The information on this page was compiled from a series of posts on my blog in December, 2007 about the use of digital signatures in the CAD industry. Note that some information and links that were current as of the original writing may now be out of date.

CMS Web Site

Wed, 17 Jan 2007 00:00:00 +0000

Introduction

The information on this page was compiled from a series of posts on my blog in January, 2007 entitled "I'll take web sites for $200, Alex". The posts document what I learned during the creation of my first content managed web site. Note that some information and links that were current as of the original writing may now be out of date.

ADW '98

Thu, 24 Sep 1998 00:00:00 +0000

Introduction

This year I'm breaking tradition to acknowledge the changes at this annual event. The venerable "Autodesk University" is now just one facet of the more inclusive "Autodesk Design World", or ADW for short. As usual, I'm compelled to record my adventures for posterity. Enjoy!

AU '97

Sun, 12 Oct 1997 00:00:00 +0000

Introduction

A last-minute substitution garnered me a place at AU '97 this year. I hadn't planned on making the trip, but I'm glad I did, now that it's behind me. Enjoy my ramblings.

Owen Wengerd, President
ManuSoft

My Diary

AU '96

Mon, 23 Sep 1996 00:00:00 +0000

Introduction

This year, I decided that Chicago was close enough to home to make the trip to AU. To defray expenses, I offered to teach a course on "Sheet Metal Flat Development with AutoCAD" (MCH021).

Owen Wengerd, President
ManuSoft

My Diary

Sheet Metal Bend Allowance

Mon, 16 Sep 1996 00:00:00 +0000

Do you use AutoCAD in a sheet metal manufacturing environment? Do you perform bend allowance calculations for traditional sheet metal flat development? Take a look at Owen’s Autodesk University course on the subject (in MS Word ‘95 format): FlatDev.zip (104k). The course provides a system of generic formulas and instructions. You’ll also want to download the two associated AutoLISP functions: an AutoCAD based interactive bend allowance calculator (BCAL.LSP) and a developed blank size calculator (BDEV.LSP), both available on the Freebies page.