I’ve received several emails recently from users of my VC Build Hook utility that mention switching the ‘UseVC7Paths’ setting on and off depending on the build configuration they are working on. If you are doing this, you need to change your project structure! ...
AutoLISP programmers may remember a product named ObjectDCL, by 3rd Day Software. ObjectDCL was released as open source in the summer of 2006 by developer Chad Wanless due to his inability to continue supporting the software because of “health reasons”. At the time, many users of ObjectDCL hoped that someone would update the code to work in AutoCAD 2007. Programmer David Robison did some work to get AutoCAD 2007 supported, but the project has been languishing, almost to the point of extinction. After being asked by several ObjectDCL users whether I could help, I decided a few weeks ago to contribute to the community by getting the original C++ code updated to support AutoCAD 2007. As I am wont to do, I’ve ended up re-architecting much of the code in the process. The results of my work are available now at the new OpenDCL project on SourceForge. The new 4.0 release is still in the alpha testing phase. If you program in AutoLISP and want to create rich user interfaces for your applications, check it out!
(continued from Part III) Creating custom modules for DotNetNuke is an esoteric process that I don't recommend unless you're prepared to invest quite a bit of time and effort. I slogged through the process because I'm too stubborn to quit, but it's hardly worth the investment in time for a one-off custom module. I don't expect many of my readers to try it anyway, so I won't bother describing the technical aspects in any detail. ...
(continued from Part II) DotNetNuke (aka DNN) is not simple to set up. It needs at least the free SQL Server Express Edition on the host system (full SQL Server requires some changes to the default configuration) and either IIS or another ASP .NET 2.0 compatible web server to run on. If you have Visual Studio 2005 fully installed, you have all you need to run DNN. ...
With the advent of Visual Studio 2005 and automatically generated manifest files, the topic of when and how to use manifest files comes up occasionally. Since a default ObjectARX wizard generated project in Visual Studio 2005 generates an embedded manifest by default, most people don’t even think about it. Of course that was the whole idea – the manifest would ensure that the correct dependent DLLs get loaded, and voila, no need to think about it. One of my programming axioms applies in this case: TANSTAAFL. The problem is that ObjectARX applications are not in charge. AutoCAD is in charge, and it will decide which VC runtime and MFC runtime DLLs to load. If your ObjectARX application loads a different VC or MFC runtime than the ones AutoCAD is using, you’ll encounter big problems. I’ve always advised disabling the manifest completely (see my ObjectARX Tips page) to avoid such a possibility. Unfortunately, there’s a catch. The problem is that linking to the ATL80.DLL file isn’t possible by just disabling the manifest and doing nothing more. ATL is now a side-by-side (SxS) assembly, and it no longer lives on the Windows support path, so a standard un-manifested DLL won’t be able to find it. The preferred solution is to link statically to ATL (see Configuration -> General -> ‘Use of ATL’ in VS 2005 project properties) and avoid the problem altogether. If you only have one module that uses ATL, this is always the best solution. The less desirable solution is to add a manually-created manifest that specifies the desired ATL SxS assembly, but ignores the VC and MFC runtime DLLs. You’ll still need to decide whether to make ATL shared or private, and in either case you must distribute ATL with your application to ensure that it is available when your application is deployed. You can cheat, and let VS generate your manifest file (instruct it to not embed the file), then just edit the resulting .manifest file to remove references to the VC and MFC assemblies. For example, here’s one that I generated (you’ll need to generate your own to ensure that the manifest matches the version you are redistributing): <?xml version=“1.0” encoding=“UTF-8” standalone=“yes”?> <assembly xmlns=“urn:schemas-microsoft-com:asm.v1” manifestversion=“1.0”> <dependency> <dependentassembly> <assemblyidentity type=“win32” name=“Microsoft.VC80.ATL” version=“8.0.50727.762” processorarchitecture=“x86” publickeytoken=“1fc8b3b9a1e18e3b”> </assemblyidentity> </dependentassembly> </dependency> </assembly> In my work, I’ve had very little need for manifests. The VC optimizer is able to strip the unused portions of statically linked ATL out of your code, leaving a much smaller footprint than the entire assembly would require. This eliminates the need to redistribute ATL with your application, thus reducing the overall potential for deployment issues. Nevertheless, there are exceptions to every rule, and your mileage may vary.
(continued from Part I) The kind of web site I wanted to create is usually built on top of a Content Management System (CMS) that becomes the administrative user interface as well as the framework for web pages that get served to web site visitors. The first thing I learned is that there are thousands of CMS products floating about the internet, from simple “guest book” type scripts to full blown corporate extranet management systems designed for use by tens of thousands of employees and customers. I’ve also been looking for an excuse to learn ASP.NET, so I decided to narrow my search to CMS software that was based on ASP.NET. Finally, the software had to be free or very inexpensive. ...
I’m one of those throwbacks that learned HTML by typing it in Notepad. I’ve since moved up to using the Visual Studio editor; it does syntax coloring, error highlighting, and has a “design” mode for previewing the page, yet it’s a very utilitarian editor that I feel comfortable with. I do use FrontPage when I need to manage connections between multiple HTML pages, but mostly in raw HTML mode. When I use WYSIWYG design mode in FrontPage, I inevitably end up cleaning out a lot of unnecessary junk that it includes in the generated HTML. I think it’s fair to say that my obsession with clean HTML results in utilitarian, functional, and standards conformant presentations – but with a decided lack of graphic appeal. The ManuSoft and CADLock web sites are examples of this utilitarian approach. The ManuSoft site uses no fancy graphics and relies very little on client side scripting, and it supports a hierarchical navigation system using only standard hyperlinks. I like that minimalist approach, but the price for clean HTML being served to clients is a lot of work on the server to maintain the site. As a result, I don’t update the site very often because it’s just too difficult. This blog was the first step toward realizing a goal of making it easier to add new content. After all, the raison d’être of blogs is to minimize the latency between the writer’s stream of consciousness and words on the web by making it irresistibly easy to add new content. This is precisely why blogs have become so popular. Unfortunately, I soon found limitations with my blog. Tabular lists of data still require manual HTML input, it is difficult to customize the content area outside the individual posts on the blog page, and most aspects of the hosted blog software are outside my control. I wanted more. The Autodesk vs. Open Design Alliance lawsuit gave me an excuse to take the next step: implement the “blog” concept across an entire web site with software that I control. So, I decided to swallow my pride and learn how to create an entire web site that would be so easy to update that I would actually update it frequently – even if it meant messy HTML code. Stay tuned for Part II, choosing a hosting service and deciding which software to use.
I’ve installed Visual Studio 2005 SP1 and have been busy testing all my projects to make sure they didn’t break. Microsoft did fix at least one of the bugs I reported (the resource editor choked on resource strings that contained an embedded NULL character), but the IDE still crashes fairly consistently if I initiate a large solution build while the Intellisense database is being rebuilt. SP1 also managed to break my VCBuildHook utility, so I’ve uploaded an updated version (2.0.3.0) for use with SP1.
Finally, the long awaited service pack 1 for Visual Studio 2005 is released! The service pack has been in the pipeline since soon after Visual Studio 2005 shipped last November, with release dates slipping month after month. The latest official release date was announced as “early 2007”. Perhaps this was an intentional attempt to alleviate some of the waiting pains with a suprise release (or maybe just the Microsoft rumor mill on autopilot). Be prepared for a long install. The download page warns that it could take an hour or more to verify digital signatures before the service pack installation even begins.
If you’ve been programming with ObjectARX for a while, you already know that each version of the ObjectARX SDK only works with a specific version of Visual Studio. Mazhar Basa touches on the subject in his article Components of ObjectARX Applications. My VCBuildHook utility makes it possible to build for multiple target AutoCAD versions from a single Visual Studio 2005 solution, but this utility still needs the older versions of Visual Studio to be installed on the same system in order to perform its magic. The problem is, legitimate licenses of older versions of Visual Studio are hard to come by. Back in the Visual Studio .NET 2003 days, you could purchase a new license of VS 2003, then get a free license downgrade from Microsoft that allowed you to install Visual Studio 2002 side by side on the same system. That combination allowed you to target AutoCAD versions as far back as AutoCAD 2004. Unfortunately, Microsoft stopped offering the VS 2002 downgrade license when Visual Studio 2005 began shipping in November of 2006. The end result is that new ObjectARX programmers are faced with a dilemma if they need to target anything older than AutoCAD 2007. One of the attendees at my “High-Octane ObjectARX” class at AU 2006 reminded me that MSDN (Microsoft Developer Network) members can download older versions of Visual Studio from the MSDN subscriber download center. I have verified that Visual Studio .NET 2002 (VS 2002) is available for download to MSDN Professional subscribers, but I could not find Visual Studio 6.0, which is required to target AutoCAD 2000 - 2002. Visual Studio 4.2 (required for AutoCAD R14) is available though, so maybe I’m just not looking in the right place. If you are a professional software developer, whether commercial or in-house, you should consider subscribing to MSDN for various reasons. If you’re an ObjectARX programmer and need to target older versions of AutoCAD, MSDN may be the only way to obtain the older Visual Studio build tools and libraries that you’ll need.
Some years ago I wrote a small ObjectARX module named VLXLoad that loads a .vlx file of the same name and in the same directory as the .arx module. I never claimed credit for the utility, but now that I’ve released the source code, I guess I’ll have to own up to it. ...